HARDI ISO F-110
Standard FLATFAN nozzles
For Optimal Coverage and Uniform Distribution.
All-round FLATFAN nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements)
- ISO: flow, colour and outer dimensions
- Working pressure: 1.5 to 5 bar
- Recommended for TWIN sprayers
- SYNTAL: Precision moulded thermoplastic
- CERAMIC: Extremely high durability
- COLOR TIPS for safe and easy handling
HARDI ISO LD-110
LOWDRIFT nozzles
Minimise Drift and maximise spray efficiency
LOWDRIFT nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed. This nozzle will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements)
- ISO: Flow, colour and outer dimensions
- Working pressure: 1.5 to 5 bar
- SYNTAL: Precision moulded thermoplastic
- CERAMIC: Extremely high durability
- COLOR TIPS for safe and easy handling
- Restrictor designed for minimum chemical residues
HARDI ISO MINIDRIFT
Air inclusion nozzles
Drift minimisation for sub-optimal weather conditions
The HARDI MINIDRIFT nozzles can be used for spraying at sub-optimal weather conditions when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.
This nozzle will give you excellent and uniform liquid distribution at boom heights from 40 to 90 cm.
The droplet spectrum is coarse to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The venturi can easily be removed for cleaning the nozzle.
- Working pressure: 1 to 6 bar
- ISO: flow, colours, sizes and nomenclature
- Application rates from 60 to 430 l/ha (at 8 km/h)
- SYNTAL: precision moulded thermoplastic
- Air inclusion nozzles
- Two big air inlets reduce the risk of clogging
- Compact design reduces impact damage
- Meets full ISO specifications
HARDI ISO NANODRIFT
Air inclusion nozzles
The HARDI NANODRIFT nozzles should be used when high drift reduction is required. The NANODRIFT nozzle will at low pressures reduce drift to a minimum. The droplet spectrum is coarse to very coarse; safe for drift control but without risking poor coverage and deposition on leaves.
The NANODRIFT is available in 8 sizes and has a working pressure of 1.0 to 6.0 bar, this nozzle is the ideal solution when higher volume rates are required.
The commonly used size of HARDI NANODRIFT nozzles is approved at the German Julius Kuehn Institute (JKI) and will be registered in the drift reduction technology scheme. The Julius Kuehn drift reduction level is the highest worldwide and the registration is used in several countries in Europe.
- Working pressure: 1.0 to 6.0 bar
- ISO: flow, colours, sizes and nomenclature
- Application rates from 85 to 850 l/ha (at 8 km/h)
- SYNTAL: Precision-moulded thermoplastic
HARDI ISO INJET
Air inclusion nozzles
The HARDI INJET nozzles can be used for spraying at sub-optimal weather conditions, or when spraying cannot be postponed. The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded.
The HARDI INJET & B-JET nozzles can be mounted using the 334083 ISO/INJET cap.
- Air inclusion nozzles with greater drift reduction
- ISO flow, colours and nomenclature
- Application rates from 60-600 l/ha (at 8 km/h)
- Pressure range: 3-8 bar
- B-Jet border nozzle for precise application near sensitive areas
- Available in SYNTAL and CERAMIC materials
HARDI ISO MINIDRIFT DUO
Air inclusion nozzles
The HARDI MINIDRIFT DUO nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT DUO nozzle will at low pressures reduce drift to a minimum.
This compact flat spray air injector nozzle offers a droplet spectrum from medium to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The two angled fans increase the number of droplets and impacts on the target compared to normal air injector nozzles.
Good coverage of dense foliage and vertical targets. The injector can easily be removed for cleaning the nozzle.
The HARDI MINIDRIFT DUO nozzles can be mounted using the 334083 ISO cap.
- Working pressure: 1.5 to 6 bar ISO flow, colours, sizes and nomenclature
- 30° forward and backward angle
- Application rates from 125 to 420 l/ha (at 8 km/h)
- SYNTAL: precision moulded thermoplastic
HARDI DUOCAP
Double-up your application
HARDI DUOCAP gives you a higher volume rate while still maintaining proper droplet size. Fitted with two F or LD nozzles HARDI DUOCAP will give Fine to Medium spray, suitable for fungicide spraying.
Two different nozzles can be used. A Standard and a MINIDRIFT nozzle will give you the dual benefit of having Fine droplets, ensuring good coverage at the top of the crop and Coarse droplets, penetrating to the lower and more dense areas.
HARDI DUOCAP fitted with two MINIDRIFT nozzles will give superior penetration into dense crops like Potatoes and Soybeans.
- Improved coverage
- Angled spray ensures penetration in dense crops
- Can hold all ISO nozzles
- 30° forward and backward angle
HARDI ISO F 80
FLAT FAN nozzles
This nozzle has an 80° spray angle. On boom sizes from 24 to 36 m the boom height is often higher than 50 cm above the target. 80° nozzles provide good coverage with reduced drift risk at these higher boom heights and are also adaptable to band spraying.
The 80° nozzle is suitable for big booms or row crop / band spraying with either low boom or nozzles at droplegs.
- ISO: flow, colour and outer dimensions
- Spray angle: 80°
- Working pressure : 1.5 to 5 bar
- SYNTAL: Precision moulded thermoplastic
- CERAMIC: Extremely high durability
HARDI QUINTASTREAM nozzles
Liquid fertilizer nozzles
Five (5) streams of liquid are distributed at different angles and flow by each QUINTASTREAM nozzle. The highest flow is from the middle stream and the lowest is in the outer, overlapping streams.
- The fastest way to convert your sprayer into a high-precision fertilizer applicator
- 5 solid streams that minimise crop scorching
- Particularly important for wide booms at fast speeds
- ISO standard for easy calibration
- Turn and Clean the key for restrictor removal
- Boom height 35-100 cm
1553 Solid stream nozzle
Liquid fertilizer
HARDI 1553 Cone nozzles are used without swirl plates for solid stream and with swirl plates for hollow cone and full cone spraying.
Use the solid stream for liquid fertilizer on boom sprayers.
- For the application of liquid fertilizer at 25 cm nozzle spacing, with a minimum risk of scorching
- Flow rates from 0.29-22 l/min (at 1-10 bar)
- SYNTAL: Precision moulded thermoplastic:
- precise, resistant and durable
