With the minimum amount of drift combined with the prevention of under and overdosing, the HARDI PulseSystem is set to revolutionize the application technologies.
The PulseSystem's ability to open and close the nozzles ensures the droplet size and spray quality remain unchanged while the nozzles remain open from 30-100% at the same pressure. Therefore, the same nozzle can be used at several different driving speeds.
Additionally, unlike a conventional system where more drift occurs the more liquid you try to squeeze through the nozzles, the PulseSystem has the ability to maintain the size of the selected droplets. Therefore, the flow rate is optimized while the drift is minimized, as the most optimal droplet size can be maintained.
By using CurveControl, individual nozzles are moderated so that the spraying application is the same throughout the boom.
During curves, the outer boom moves faster than the inside boom. Hence, the PulseSystem ensures that the spray is applied evenly across the whole boom. Therefore, under- and overdosing on chemicals can be prevented, thereby helping to minimise environmental impact.
In addition, the PulseSystem works with a single nozzle on/off – on a 36 m boom, all 72 nozzles are open and closed on nozzle level. This can be done, for example, via digital application maps. The spray job can be done in small spots, the spot size depends on the spray width of the nozzle and a speed-related security level, which is set up to open the nozzle early enough to hit the target. Depending on the amount of weed spots in the field, at the time of application, the saving potential is up to 90% compared to a complete broad spray of the field.
The HARDI PulseSystem is supplied for the conventional DELTA FORCE boom on AEON and NAVIGATOR, as well as the TWIN boom on AEON. We are ready to offer the system to a limited number of units in 2023.