With minimal on-boom hardware it optimises boom ride, weed targeting, chemical preparation and sprayer speed. Work up to 30km/h to save time, chemical and running costs.
Map every weed in your paddock up front using a manned-aircraft or drone, with centimetre accuracy, then transfer the data to the spray computer for processing. Sensors on the boom continuously measure boom height and boom deflection and adjust each nozzle within micro-seconds to target each weed, at speeds up to 30km/h and with a 99.7% accuracy rate. The software calculates exactly how much chemical you will need before you start.
By spraying only where required, chemical use can be reduced up to 90%.
GeoSelect is a selective-spraying solution that uses high resolution spatial data.
It decouples the sensor from the sprayer, taking advantage of fast evolving detection technology on UAV, manned aircraft and satellites.
Learn more about GeoSelect here
Factors such as the optimum speed to drive in certain parts of the paddock or skipping certain run lines altogether due to absence of weeds in a particular area are taken into consideration to achieve maximum efficiency and savingsLearn about the advantages of GeoSelect
Selective Spray, Blanket Spray or both. Optimise spray delivery for a wide range of speeds - turn compensation, droplet control and simultaneous spot spraying allows chemical delivery like no other.Learn More
GEOSELECT allows spraying only where required. Know how much chemical before you spray, how fast to go and what areas to skip. Unrestricted by boom width, spray speed and light conditions
Watch GeoSelect in action. LED Lights indicate which nozzles are working.
Do you want to know more? We have created a Frequently Asked Questions section that hopefully will answer most of your questions. If not, we would welcome the opportunity to discuss how GeoSelect can help you save time, money, and chemicals.
Just fill out the contact form at the bottom of the page and we'll contact you within 24 hours.Click here for GeoSelect FAQs