HARDI ISO MINIDRIFT
Air inclusion nozzles
The HARDI MINIDRIFT nozzles can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.
This nozzle will give you excellent and uniform liquid distribution at boom heights from 40 to 90 cm.
The droplet spectrum is coarse to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The venturi can easily be removed for cleaning the nozzle
HARDI ISO MINIDRIFT DUO
Air inclusion nozzles
The HARDI MINIDRIFT DUO nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT DUO nozzle will at low pressures reduce drift to a minimum.
This compact flat spray air injector nozzle offers droplet spectrum from medium to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The two angled fans increase the number of droplets and impacts on target compared to normal air injector nozzles.
A good coverage on dense foliage and vertical targets. The injector can easily be removed for cleaning the nozzle.
The HARDI MINIDRIFT DUO nozzles can be mounted using the 334083 ISO cap.
HARDI ISO NANODRIFT
Air inclusion nozzles
The HARDI NANODRIFT nozzles should be used when high drift reduction is required. The NANODRIFT nozzle will at low pressures reduce drift to a minimum. The droplet spectrum is coarse to very coarse; safe for drift control but without risking poor coverage and deposition on leaves.
The NANODRIFT is available in 8 sizes and a working pressure of 1.0 to 6.0 bar, this nozzle is the ideal solution when higher volume rates are required.
The common used size of HARDI NANODRIFT nozzles are approved at the German Julius Kuehn Institute (JKI) and will be registered in the drift reduction technology scheme. The Julius Kuehn drift reduction level is the highest worldwide and the registration is used in several countries in Europe.
Read more about NANODRIFT nozzlesHARDI ISO INJET
Air inclusion nozzles
The HARDI INJET nozzles can be used for spraying at sub-optimal weather conditions, or when spraying cannot be postponed. The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded.
The HARDI INJET & B-JET nozzles can be mounted using the 334083 ISO/INJET cap.
HARDI ISO LD-110
LOWDRIFT nozzles
LOWDRIFT nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed. This nozzle will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements)
HARDI QUINTASTREAM nozzles
Liquid fertilizer nozzles
Five (5) streams of liquid are distributed at different angles and flows by each QUINTASTREAM nozzle. Highest flow is from the middle stream and lowest in the outer, overlapping streams.
HARDI ISO F-110
Standard FLATFAN nozzles
All-round FLATFAN nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements)
HARDI DUOCAP
Double-up your application
HARDI DUOCAP gives you higher volume rate while still maintaining proper droplet size. Fitted with two F or LD nozzles HARDI DUOCAP will give Fine to Medium spray, suitable for fungizide spraying.
Two different nozzles can be used. A Standard and a MINIDRIFT nozzle will give you the dual benefit of havíng Fine droplets, ensuring good coverage in the top of the crop and Coarse droplets, penetrating to the lower and more dense areas.
HARDI DUOCAP fitted with two MINIDRIFT nozzles will give superior penetration into dense crops like Potatoes and Soybeans.
HARDI ISO F 80
FLAT FAN nozzles
This nozzle has an 80° spray angle. On boom sizes from 24 to 36 m the boom height is often higher than 50 cm above the target. 80° nozzles provide good coverage with reduced drift risk at these higher boom heights and are also adaptable to band spraying.
The 80° nozzle is suitable for big booms or row crop / band spraying with either low boom or nozzles at droplegs.
1553 Solid stream nozzle
Liquid fertilizer
HARDI 1553 Cone nozzles are used without swirl plates for solid stream and with swirl plates for hollow cone and full cone spraying.
Use the solid stream for liquid fertilizer on boom sprayers.
Where to go from here?
